Deionization
(DI) filters
De-mineralize filter takes the
full size RO to a higher level of filtration. It is an excellent
inline filter, especially those who live in areas with
exceptionally high levels of TOTAL
DISSOLVED SOLIDS (TDS) in their tap water. The post
deionizer takes the small percentage of contaminants that the
membrane could not remove and filters this to greater than 99.99%
pure. It will give you 0 ppm TDS,
Conductivity attainable less than 0.1uS/cm or resistivity of close
to 18 meg.ohm
Technical Specifications:
- Diameter: 53mm
- Length: 254mm
- Max. flow rate:
200 l/24h
- Max. pressure:
4bar
- Capacity: 500
gallons (2000 liters)
- In refillable clear inline housing
Refillable clear inline housing + DI
(de-mineralize) resin filter:
Produce 99.99% pure
water by simply attaching this convenient deionization filter with
RO unit. Convenient post RO filtration DI unit (RO/DI unit)
provides crucial supplemental filtration to remove most impurities
for pure polished product water. Excellent in areas with hard
water. Produce 99.99% pure water.
It will give you 0 ppm TDS, Conductivity attainable less than
0.1uS/cm.
Upgrade your RO system with DI filters. EX: EC106-DI or
Aquarium RO/DI
Product Brochure
