Smart microprocessor control system
You can know when should replace the cartridges filters. This system build-in TDS meter to know the water quality. An easy way to tell if the membrane needs to be replaced. It is very easy to know the membrane's effectiveness from the LCD display. To protect you not to drink the bad water.  
 
 
TDS reading
Showing your water quality - To show the TDS and the system's working time were usually been installed in the industry RO units only, we are the first manufacturer to install it in the residential RO units. Click here to know more.. TDS showing box.

 
Auto flushing membrane to get the best water quality
Built-in the auto flushing and self-cleaning procedure, so the membrane remains clean. Water never stands still for a longer time to avoid bacteria growing. Let all of your customers can enjoy the best water quality.
 
 
5 Indicators & LCD display : shows how it works 
Easy to control the RO system and let you more understand the RO system. Smart to warn you if the operation is affected for any reason. It is so safety to protect you not to drink the bad water and an easy way to tell if the membrane needs to be replaced.

 

Quick-change cartridge RO system
PurePro® ROYAL RO system uses 100GPD membrane which is powerful, fast and excellent efficiency. 100GPD membrane increase the daily production capacity and the speed of RO water production. This allows for better assurance that there is adequate water available when desired, even during heavy use times of the day. PurePro® ROYAL RO with its supreme quality ensures a great water flow rate with absolutely the least wasting of water.

 
The newly designed ROYAL RO system is user friendly with design simplicity in mind. It requires no tools for filter changes. Use twist and quick-change cartridge design makes filter changes fast, clean and easy. No tools required for replacements. This space saving allows maximum use of your under counter space.

 

Pressure Gauge
Helpful in monitoring house incoming water pressure, also for operation pressure of the RO system while it's working time to replace sediment & carbon filters ; which indicate you to replace the filters when changes in reading start especially when pressure drop increase, which is an indication that the cartridges are clogging with particular matters or the filters media, is exhausted and the water inside the system can't pass through the filters normally.

 

Easy Installation
The stylish design of the PurePro® ROYAL RO system was created to fit elegantly in any kitchen environment. The economical, friendly, easy-to-install and easy-to-maintain solution to your purified water needs. Use quick-fitting connector design makes installation fast and easy.

 

 

 

Features:
100GPD membrane. (Made in USA)
3.2 Gallons NSF Standards Water Storage Tank.
Automatic Shut-off Valve, Flow Restrictor, Stainless Steel Check Valve. 
Use twist and quick-change cartridge design makes filter changes fast, clean and easy.
Feed water connector.
Drain Saddle Valve.
Four Color Coded 1/4 inch Tubing for System Connection 
Completely Assembled
PurePro® Best Seller Faucet (European Design Faucet).
100% Factory Tested and Sterilized Ready for Installation.
Installation Instruction. 

 

RS-103TDS quick-change cartridges
(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.
(Stage 2) Granular Activated Carbon Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 3) Granular Activated Carbon Filter :
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.
(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes 100 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.

(Stage 4) PurePro Eco RO Membrane  : (optional)
Advanced Eco RO Membrane features next-generation membrane technology offering the highest quality permeate at 30% lower energy consumption. Enabled with a Mineral Guard technology, this membrane can retain essential minerals in your drinking water, making it safe, pure and healthy. PurePro Eco RO membrane removes bacteria, viruses, heavy metals, viral contaminants, and other dangerous elements while still allowing valuable minerals to pass through, for your body to absorb.  ( PurePro ECO RO Membrane )

(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.

 

Specifications:
Membrane: 100 GPD / 378 LPD 
With a transformer, available in 110Volt, 220Volt or 240Volt (50/60Hz).
Operation pressure: 5 -80 psi 
Dimensions: (cm) 27.5 (L) x 44.5(H) x 26.5 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank 
Weight: 8 kg - system
             4 kg - tank

Why is reverse osmosis better?
Reverse Osmosis (RO) drinking water systems include mechanical filtration to remove particles, carbon absorption and absorption to remove chloring, taste, odor and chemical contaminants, as well as membrane separation down to 0.0001 microns. RO membranes remove dissolved solids at the ionic level. No other purification system can provide better removal.
 
 
 
PurePro® RO System provides the best quality drinking water for your family

Why is Reverse Osmosis better?
 
 
 
Product Catalog:
Download Product Catalog
Private label is very welcome !
 
 

PurePro® ROYAL RO series:
ROYAL RO Systems are using quick-change cartridges. From RS105P~RS103TDS, all of them are using quick-change cartridge filters. Quick-change cartridge design makes filter changes fast, clean and easy.

 

 

PurePro®  ROYAL RO Systems:

[ RS-105P ] [ RS-106M-P ] [ RS-106R-P ] [ RS-106A-P ] [ RS-106UV-P ] [ RS-103TDS ] [ RS-108 MRA-P ] [ PurePro® R8 ]