|
|
 |
FS301-DI
Aquarium RO/DI system
Removes up to 99.99% of all impurities - including
silicates - for clean, clear aquarium
|
Aquarium RO/DI system
Clean, pure water is a priority for all fish. No
equipment is more effective in helping create ideal water conditions as
Reverse Osmosis (RO) units. These units filter out up to 99% of
chemicals found in tap water by forcing tap water through a
semi-permeable membrane
that removes 90-99% of tap water impurities. The result is water that is
free of minerals and other contaminants.
Our Aquarium RO Systems meet stringent
standards and far exceeds the quality of systems from other
manufacturers. A wide variety of options ranging from economy 3-stage
units to top of the line 5-stage RO/DI units are available to suit your
exact needs.
Deionization
(DI)
filters
De-mineralize
filter takes the full size RO to a higher level of filtration. It is an excellent selection for
reef enthusiasts and other serious aquarists, especially those who live
in areas with exceptionally high levels of phosphates in their tap
water. Our unit includes: sediment pre-filters, carbon pre-filters and TFC
(Thin Film Composite) membrane, Deionization
(DI) post-filters in clear housings. The
post deionizer takes the small percentage of contaminants that the
membrane could not remove and filters this to greater than 99.99% pure.
It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm
or resistivity of close to 18 meg.ohm
Build-in Pressure Gauge
The minimum operating pressure
for a RO (reverse osmosis) unit is 50 psi (pounds per square inch). This
unit build-in pressure gauge to monitor the operating pressure of the
system. If the operating pressure is too low, an RO pressure boosting
pump can be added to increase the operating pressure to the ideal range.
Why do I need RO water ?
Tap water often contains
impurities that can cause problems when added to an aquarium. These
include phosphate, nitrate, chlorine, and various heavy metals. High
levels of phosphate and nitrate fuel aggressive algae growth, and
copper, often present in tap water due to leaching from pipes, is highly
toxic to invertebrates. Because RO filters remove practically all of
these impurities, they are becoming more popular among aquarists,
particularly marine hobbyists.
(please click
here for more information)
FS301-DI Flow Diagram
Features:
-
Reverse
Osmosis Technologies
-
Easy to
Use and Store
-
Three
Color Coded Tubing For System Connection.
-
Include Common Faucet Adaptor For Easy
Installation.
-
100% Factory Tested and Sterilized.
-
Include Installation Instruction.
Deionization
(DI) Filter.
Pressure Gauge
Booster Pump For Low Pressure Needs (Optional)
80GPD,
100GPD, 200GPD Membrane (Optional)
FS301-DI cartridge filters
-
(Stage
1) 5 Micron Sediment Filter :
With only five micron
rating. It is effective in removing dirt, rust and sand particles.
-
(Stage 2) Carbon
Block Filter:
It takes out 99% of the
chlorine and organic chemicals. It provides enhanced reduction of
taste, odor, and color. Protect and prolong
the life of membrane.
-
(Stage
3) Reverse Osmosis Membrane:
A thin film composite (TFC)
high quality membrane that processes 50 gallons per day. It remove
the following hard water contaminants that may be present in your
water: lead, cooper, barium, chromium, mercury, sodium, cadmium,
fluoride, nitrite, nitrate, and selenium.
-
(Stage
4) Deionization (DI) Filter:
Produce 99.99% pure water by simply attaching
this convenient deionization filter with RO unit. Convenient post RO
filtration DI unit (RO/DI unit) provides crucial supplemental
filtration to remove most impurities for pure polished product
water. Excellent in areas with hard water. Produce 99.99% pure
water. It will give you
0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity
of close to 18 meg.ohm
Specifications:
Production: 50 GPD / 189 LPD
Minimum Operation pressure: 50 psi
Dimensions: (cm)28 (L) x 35 (H) x 15 (W) - system
Weight: 4.8 kg - system
Frequently Asked Question
Download Product Catalog & Poster
Aquarium
RO systems
with DI filters:
|
